제품 세부 사항

소음이 적은 파워 스티어링 오일 펌프

소음이 적은 파워 스티어링 오일 펌프

코너링 중 언더스티어는 코너링 중 차량 회전량이 부족한 것으로 나타납니다. 그 이유는 로커 샤프트에 설치된 스티어링 로커 암의 위치가 잘못되었거나, 스티어링 각도 제한 볼트 조정이 너무 길거나, 프런트 액슬이 앞뒤로 움직이거나, 순환 볼 또는 스티어링 기어 섹터 톱니와 웜 박스의 조립 위치가 잘못되었기 때문입니다.

하위 카테고리

  • 설명
  • Product Attributes

    Model No.:FZB12E9D7G
    Brand:FZB
    Place Of Origin:China

    Packaging & Delivery

    Selling Units:Piece/Pieces
    Package Type:PAPER BOX, PALLET

    Picture Example

    Product Description
    Common faults - insufficient cornering
    Understeer during cornering is manifested as insufficient amount of rotation of the vehicle during cornering. The reason is that the position of the steering rocker arm installed on the rocker shaft is incorrect; Steering angle limit bolt adjustment is too long; Front axle moving forward and backward; The assembly position of the circulating ball or steering gear sector tooth and the worm box is incorrect.
    Critical parameters

     Part Name Hydraulic Power Steering Pump
     Function Provide hydraulic fluid to steering gear
     Type Vane pump
     DARE PN FZB12E9D7G
     REF. PN 
     OEM PN 5633050
     Application DONGFENG
     Nom. Displacement 30 ml/r
     Max. Pressure 195 bar
     Speed Range 500-3500 rpm
     Flow Rate 20-22 L/min
     Inlet Port M27X1.5-6H
     Outlet Port M18X1.5-6H
     Direction of Rotation Left

    Cause of failure and troubleshooting
    The power pump of the steering gear does not absorb oil or the oil outlet pressure is too low.
    Causes of failure
    1. The filter element is blocked, and the oil pipe is blocked due to the corrosion resistance of the rubber.
    2. There is air leakage at the oil pipe joint, and air enters.
    3. The parts of the booster pump are worn out, and the gap is too large, resulting in weak oil output.
    4. The oil does not meet the requirements or has been used for too long, the viscosity is too high, and the sliding resistance of the blade is large.
    5. The oil level in the oil storage tank is too low.
    Remedy
    1. Clean the filter element with alcohol, replace the oil pipe, and add hydraulic oil to the specified position.
    2. Check the tight connection parts to prevent air from entering.
    3. Check and repair the booster pump, and replace severely worn parts.

관련 제품

제품 컨설팅

* 참고: 정보를 정확하게 기입하고 통신을 차단하지 마십시오. 가능한 한 빨리 연락 드리겠습니다.

메시지 제출